Waterproofing
print this pageemail a friend

Foundation

foundationWhen you want to keep water out of your foundation, Henry has a waterproofing solution for your project. From fluid-applied to sheet-applied options, Henry waterproofing products provide the reliable protection you need. And combined with its drainage board options, you can trust Henry to keep the foundation dry and safe.

View the product selection chart below to see which Henry solution is best for your project.

Product CM100 Aqua-Bloc SB Aqua-Bloc WB Aqua-Bloc QS Aqua-Bloc 2P
Product
Description
  • Excellent adhesion to most construction surfaces, including "green" concrete
  • Ideal for small, confined spaces or hard-to-get-at applications, including both vertical and horizontal surfaces
  • Applied via squeegee or roller to create a seamless, rubber-like impervious membrane
  • Ideal for cold weather applications
  • Repairs damaged hot rubberized membranes
  • Apply via trowel or spray equipment
  • Heavy-duty seamless, rubberized, impervious membrane
  • Excellent adhesion to most construction surfaces
  • Approved for use on damp or green concrete; excellent for waterproofing ICF foundation walls
  • Apply via trowel, brush or spray equipment
  • Exceeds the requirements of CAN/CGSB 37.2; low VOC,
  • Ideal for quick backfilling requirements
  • Specifically designed for vertical application
  • Apply via spray equipment with setting agent
  • Complies with and exceeds the requirements of CAN/CGSB 37.1M; low VOC
  • Levels, repairs and waterproofs rough and uneven concrete surfaces
  • Leveling coat for Blueskin® WP200 or DuraTac self-adhering membranes
  • Apply via squeegee or trowel
  • 100% solids, solvent and odor free; sets very rapidly and develops a strong bond
Type Elastomeric, solvent-free, moisture cure waterproofing compound Elastomeric liquid membrane Elastometric, liquid-applied, emulsified asphalt membrane Elastometric, liquid-applied "quick setting" emulsified asphalt membrane Elastomeric liquid membrane
Application Temp Minimum of 35ºF Minimum of 10.4°F Minimum of 40°F Minimum of 40°F Minimum of 15°F
Application Method Trowel/Roller/Squeegee Trowel/Squeegee/Spray-applied Trowel/Brush/Spray-applied Brush/Spray-applied Squeegee or trowel
Product 785 Asphalt Emulsion Damp proofing – Trowel Grade 787 Elastomeric Fluid-Applied Waterproofing membrane 788 Non-Fibered Asphalt Emulsion Damp proofing 789 Fibered Asphalt Emulsion Damp proofing
Product
Description
  • For damp proofing of walls and foundations
  • Can be used above-grade to provide a "breathable" moisture barrier, used for damp proofing the exterior walls in cavity wall construction
  • Meets ASTM D1227 Type II, Class I
  • For use in waterproofing or damp proofing concrete and masonry surfaces above and below grade
  • Excellent adhesion to most construction surfaces such as concrete, brick, stone, wood or metal
  • Retains flexibility in wide temperature range
  • For below-grade damp proofing of walls and foundations
  • Can be used above-grade to provide "breathable" moisture barrier, used for damp proofing exterior walls in cavity wall construction
  • Meets ASTM D1227, Type III Class 1, and ASTM D1187 Type I
  • For below-grade damp proofing of walls and foundations
  • Can be used above-grade to provide a "breathable" moisture barrier, used for damp proofing the exterior walls in cavity wall construction
  • Meets ASTM D1227, Type II Class 1, and ASTM D1187 Type I
Application Temp Minimum of 45°F Minimum of 40°F Minimum of 50°F Minimum of 50°F
Application Method Trowel Brush/Trowel/Spray-applied Brush/Spray-applied Brush/Spray-applied
Product 101 Non-Fibered Foundation Coating 793 Foundation Coating – Trowel Grade 794 Premium Foundation Coating – Brush Grade 795 Foundation Coating – Spray Grade
Product
Description
  • Ideal for damp proofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry
  • Provides a durable, weather-resistant film
  • For below-grade damp proofing of walls and foundations
  • Provides barrier to moisture vapor on surfaces of above grade cavity walls
  • Complies with ASTM D4586, Type I
  • A multi-purpose, ready to use, fibered solvent-based asphaltic foundation coating
  • For below-grade damp proofing of walls and foundations
  • Provides continuous, vapor resistance film
  • A multi-purpose, ready to use, non-fibered solvent-based asphaltic foundation coating
  • For below-grade damp proofing of walls and foundations
  • Protects metal surfaces against corrosion
  • Complies with ASTM D4478 Type 1
Application Temp N/A Minimum of 40°F Minimum of 40°F Minimum of 40°F
Application Method Brush/Spray-applied Trowel Brush or Roller Brush/Spray-applied
Product Blueskin WP200 Blueskin WP100
Type Self-adhering composite sheet membrane Self-adhering membrane
Product
Description
  • SBS membrane flexible at low temperatures
  • Fully adhered system prevents lateral water movement
  • Specifically designed for self-adhering to a prepared substrate
  • No flame required
  • Factory controlled thickness
  • Negligible odor during application
  • CCMC approved
  • Specifically designed for self-adhering to a prepared concrete or masonry substrates
  • Provides a high-performance waterproofing barrier for below-grade use
Application Temp Minimum of 23°F Minimum of 40°F
Application Method Sheet applied Sheet applied


©  Henry Company. All rights reserved.

Privacy Policy  |  Terms of Use  |  Site Map  |  Contact