LinkedIn Youtube Facebook Twitter Sales Rep Locator Document Search
 

Aqua-Bloc® PUMA

Cold-Fluid Applied, 100% Solids Flashing System

Product Description
Installation and
Technical Literature
Specs and Details
Videos

 

Waterproofing Brochure

Aqua-Bloc PUMA
Sell Sheet

Download PDF

 

Henry Aqua-Bloc PUMA is a 100% solids, two-part, rapid-curing, liquid-applied membrane designed for flashing Henry waterproofing systems. It is applied in a layered application consisting of primer (if required), base coat, polyester fabric reinforcement and finish coat that is waterproofed within 1 hour. Henry Aqua-Bloc PUMA combines the flexibility and crack-bridging capabilities of polyurethane with rapid curing technology resulting in exceptional long-term performance and durability. The Aqua-Bloc PUMA catalyzed system forms a monolithic, self-terminating flashing membrane for a variety of new construction, refurbishment, and recovery roofing and waterproofing applications.

Features

  • Can be applied at low temperature 32°F (0°C)
  • No solvent and is VOC compliant
  • 100% solids provides high waterproofing film build with no shrinkage during curing process
  • Flexibility of polyurethane with rapid curing PUMA technology
  • Fast installation
  • Superior abrasion, impact, UV & chemical resistance
  • Excellent adhesion to properly prepared construction surfaces
  • Permanent UV stability allows for use in exposed flashing conditions

 

Waterproofing Brochure

Aqua-Bloc PUMA
Sell Sheet

Download PDF

 

Data Sheets

Henry® 195 Polyester Fabric Data Sheet Download PDF      
Aqua-Bloc® PUMA Cleaning Fluid Data Sheet Download PDF      
Aqua-Bloc® PUMA Catalyst Data Sheet Download PDF      
Aqua-Bloc® PUMA Resin Data Sheet Download PDF      
Aqua-Bloc® PUMA Early Prime Data Sheet Download PDF      
Aqua-Bloc® PUMA Primer Data Sheet Download PDF      
 

SDS Sheets

Aqua-Bloc® PUMA Fleece SDS Sheets Download PDF      
Aqua-Bloc® PUMA Cleaning Fluid SDS Sheets Download PDF      
Aqua-Bloc® PUMA Catalyst SDS Sheets Download PDF      
Aqua-Bloc® PUMA Resin SDS Sheets Download PDF      
Aqua-Bloc® PUMA Early Prime SDS Sheets Download PDF      
Aqua-Bloc® PUMA Primer SDS Sheets Download PDF      
 

Tech Talks

Aqua-Bloc® PUMA Download PDF      

 

Waterproofing Brochure

Aqua-Bloc PUMA
Sell Sheet

Download PDF

 

Architectural Details

PUMA-2 - Curb Flashing Detail Download PDF   Download  
PUMA-3A - Pipe Penetration Detail Download PDF   Download  
PUMA-3B - Round Pipe Detail Download PDF   Download  
PUMA-3C - Square Pipe Detail Download PDF   Download  
PUMA-4 - Drain Detail Download PDF   Download  
PUMA-5 - Outside Corner Detail Download PDF   Download  
PUMA-6 - Inside Corner Detail Download PDF   Download  
PUMA-7 - Wall Static Joint Detail Download PDF   Download  

 

Aqua-Bloc® PUMA Features & Benefits
Aqua-Bloc® PUMA Features & Benefits

Henry Aqua-Bloc PUMA is a liquid-applied, fully-reinforced flashing system for roofing and waterproofing. It is ideal for typical flashing details where a sheet membrane would be difficult to install and subject to failure at seams. PUMA, or polyurethane methyl methacrylate, shares the same desirable rapid-setting qualities of PMMA. But the U, or urethane, in PUMA represents an advancement in this technology, which provides much more flexibility, better crack-bridging and superior cold temperature performance.

Aqua-Bloc® PUMA Features & Benefits

×

How to mix Aqua-Bloc® PUMA
How to mix Aqua-Bloc® PUMA

Prior to adding the catalyst powder, Aqua-Bloc PUMA resin products must be mixed thoroughly for two minutes using an electric, slow speed, high torque drill with mixing paddle. Aqua-Bloc PUMA resins are supplied in a package greater than two gallons, providing room to mix in the catalyst powder. Refer to the Aqua-Bloc PUMA technical data sheet for the proper amount of catalyst powder to mix into the PUMA resin. Slowly add the catalyst powder to the resin and continue mixing for at least one minute to achieve a streak-free appearance. Refer to Henry technical data sheets and specifications prior to installing the Aqua-Bloc PUMA system.

How to mix Aqua-Bloc® PUMA

×

How to address a pipe penetration with Aqua-Bloc® PUMA

×

Aqua-Bloc® PUMA Rapid Set-Time
Aqua-Bloc® PUMA Rapid Set-Time

One of the key benefits to the Aqua-Bloc PUMA system is its rapid-set time. Once properly applied, this system is rain-resistant within one hour. Refer to Henry technical data sheets and specifications prior to installing the Aqua-Bloc PUMA system.

Aqua-Bloc® PUMA Rapid Set-Time

×